System Online Mod. K9-KJ6000C 20 Independent Bands AWJ Technology 600W Total Output
Full Spectrum Jamming System

KJ6000C

Complete Spectrum Control — 20 MHz to 6 GHz

Twenty independent AWJ-technology bands with zero frequency gaps. 30W per band, 300 MHz bandwidth per channel, 600 W combined output. Modular field-replaceable architecture. Vehicle-deployable in minutes from a 15–30V DC supply — no wiring, no drilling, no specialist installation required.

KJ6000C Full Spectrum Jamming System — K9 Electronics
Mod. K9-KJ6000C 20 Bands / 600W Total IP65 / AWJ Technology
20
Independent Bands
600W
Potencia de salida de RF total
IP65
Environmental Rating
6GHz
Upper Frequency Limit
01 / System Overview

Complete Spectrum Control. No Gaps. No Compromises.

The KJ6000C delivers uninterrupted jamming coverage from 20 MHz to 6 GHz across 20 independently controlled frequency bands. Each band incorporates AWJ (Adaptive Waveform Jamming) technology — proprietary algorithms that adapt the jamming waveform to the target signal for maximum disruption efficiency. This is not brute-force noise jamming: it is precision spectrum denial.

01
20 Independent AWJ Bands
Every one of the 20 frequency bands operates autonomously with its own AWJ module, power amplifier, heat exchanger and control circuit. Each band can be switched on or off independently from the front panel or remote control, and each has its own LED status indicator and diagnostics output.
02
300 MHz Bandwidth per Band
Each of the 20 channels covers a 300 MHz slice of spectrum with AWJ technology active across the full bandwidth. Twenty bands × 300 MHz = 5,980 MHz total covered spectrum from 20 MHz to 6 GHz with no gaps between channels.
03
Field-Replaceable Modular Architecture
Module failures are indicated on the front control panel. Faulty modules can be removed and replaced in the field without tools or specialist knowledge. Each module is a self-contained unit with independent heat exchanger — swap in minutes, return to full power immediately.
04
Vehicle-Ready — No Installation Required
Designed specifically for deployment in the rear of a pickup truck with fibreglass hardtop. Connects to any 15–30V DC supply — vehicle battery, auxiliary output or portable pack. No wiring runs, no hole drilling, no vehicle modification. In position and operational in under five minutes.
05
50W Modules & Custom Frequencies Available
Standard configuration uses 30W modules. 50W modules are available as an upgrade, doubling per-band output and extending effective range proportionally. Custom frequency band configurations are available — replace standard 300 MHz channels with narrower high-power bands targeting specific threat protocols.
02 / Frequency Band Coverage

20 Bands. Zero Gaps. Full Spectrum.

Contiguous coverage from 20 MHz to 6 GHz across 20 independently switchable 300 MHz bands. Every band is individually controllable — target specific frequency ranges or activate all 20 simultaneously for complete spectrum denial.

BandaRango de frecuenciasOutputAntenna
B-0120 – 300 MHz30 WOmni / 2 dBi External
B-02300 – 600 MHz30 WOmni / 2 dBi External
B-03600 – 900 MHz30 WOmni / 2 dBi External
B-04900 – 1,200 MHz30 WOmni / 3 dBi External
B-051,200 – 1,500 MHz30 WOmni / 5 dBi Internal
B-061,500 – 1,800 MHz30 WOmni / 5 dBi Internal
B-071,800 – 2,100 MHz30 WOmni / 5 dBi Internal
B-082,100 – 2,400 MHz30 WOmni / 5 dBi Internal
B-092,400 – 2,700 MHz30 WOmni / 5 dBi Internal
B-102,700 – 3,000 MHz30 WOmni / 5 dBi Internal
B-113,000 – 3,300 MHz30 WOmni / 5 dBi Internal
B-123,300 – 3,600 MHz30 WOmni / 5 dBi Internal
B-133,600 – 3,900 MHz30 WOmni / 5 dBi Internal
B-143,900 – 4,200 MHz30 WOmni / 5 dBi Internal
B-154,200 – 4,500 MHz30 WOmni / 5 dBi Internal
B-164,500 – 4,800 MHz30 WOmni / 5 dBi Internal
B-174,800 – 5,100 MHz30 WOmni / 5 dBi Internal
B-185,100 – 5,400 MHz30 WOmni / 5 dBi Internal
B-195,400 – 5,700 MHz30 WOmni / 5 dBi Internal
B-205,700 – 6,000 MHz30 WOmni / 5 dBi Internal
Total Coverage: 20 MHz – 6,000 MHz (complete spectrum, zero gaps)  •  Total Power: 600W (20 × 30W)  •  Upgrade: 50W modules available → 1,000W total
03 / System Components

Three Core Components. One Integrated System.

The KJ6000C ships as a complete, ready-to-deploy system. Every component is engineered for field use — simple controls, clear diagnostics, and modular serviceability without specialist tools.

KJ6000C 20-band main control panel
Component 01
Main Control Panel
Independent toggle switch and LED indicator per band — instant visual status across all 20 channels. Diagnostics display flags module faults in real time. Single master enable switch and power indicator.
KJ6000C wired remote control unit
Component 02
Wired Remote Control
Handheld remote unit for controlling all 20 bands from a safe distance. Individual band on/off, master enable, and LCD status display. Connects to the main unit via ruggedised cable.
KJ6000C 30W AWJ module with heat exchanger
Component 03
30W AWJ Module
Self-contained 30W power amplifier with integrated heat exchanger. Built-in AWJ noise source with proprietary jamming algorithm. Field-replaceable in minutes. Upgradeable to 50W module without system modification.
04 / Vehicle Deployment
KJ6000C deployed in military pickup truck

Pickup Truck Deployment in Under Five Minutes.

The KJ6000C was designed from the outset for vehicle operation. Place the unit in the cargo area, connect the DC power lead to the vehicle supply or auxiliary battery pack — and the system is operational. No vehicle modification, no wiring harness, no drilling.

The wheeled ruggedised case transitions from vehicle transport to static deployment in seconds. An AC-DC converter and portable battery pack are available as optional extras for off-vehicle and dismounted operations.

No Wiring or Drilling
Single DC power connection. Compatible with vehicle battery, auxiliary output or portable pack.
Wheeled Transport Case
Ruggedised case with wheels. Rolls from vehicle to position. IP65 sealed for operation in any weather.
Convoy & Patrol Ready
Suitable for convoy protection, EOD support, VIP motorcades and border security operations.
05 / Technical Specifications

System Datasheet.

MODEL / K9-KJ6000C  •  FULL SPECTRUM JAMMING SYSTEM  •  DATASHEET
ParameterSpecification
SistemaKJ6000C Full Spectrum Jamming System
Jamming TechnologyAWJ — Adaptive Waveform Jamming with proprietary algorithms
Frequency Coverage20 MHz – 6,000 MHz (complete spectrum, zero gaps)
Number of Bands20 independent bands
Bandwidth per Band300 MHz per channel
Output Power per Band30W standard  •  50W upgrade available
Potencia de salida de RF total600W (20 × 30W)  •  1,000W with 50W modules
Power Requirements~1,200W DC draw  •  15–30V DC external supply
Antenna SystemBuilt-in omni-directional (B5–B20) + 4× external low-frequency omni (B1–B4)
Ganancia de la antena2 dBi (20–900 MHz external)  •  5 dBi (1.2–6 GHz internal)
Band ControlIndependent per-band switching — front panel + wired remote
DiagnosticsPer-band LED status + fault indication on control panel
CoolingIndependent internal heat exchanger per module
MaintenanceField-replaceable modules — no tools required
IP RatingIP65 — dust-tight, jet-water resistant
Dimensions100 × 68 × 50 cm
MobilityRuggedised wheeled transport case
Optional AccessoriesAC-DC converter, portable battery pack
06 / Operational Applications

Where the KJ6000C Operates.

Full-spectrum coverage and vehicle-deployable architecture make the KJ6000C the most versatile mobile jamming platform in its class.

APP / 01
Convoy & Vehicle Protection
Mounted in the rear of a pickup truck or light utility vehicle, the KJ6000C provides a moving protective bubble of spectrum denial for convoys, VIP motorcades and patrol units. Full-spectrum coverage defeats RCIED triggers, drone C2 links, video downlinks and GNSS navigation simultaneously.
APP / 02
EOD & IED Defeat
Complete sub-6 GHz spectrum coverage eliminates the risk of radio-controlled IED detonation across all commercially available trigger devices. Bands 1–4 (20–900 MHz) use external antennas specifically optimised for low-frequency RCIED trigger bands.
APP / 03
Forward Operating Bases
Static deployment at the FOB perimeter provides persistent full-spectrum denial. Independent band control allows specific frequencies to be activated for the known local threat profile while preserving friendly communication channels through selective band management.
APP / 04
Border Security
Vehicle-mobile deployment along border routes. Full drone C2 and GNSS coverage prevents autonomous waypoint-programmed flights. Cellular and walkie-talkie bands disrupt coordination between smuggling networks operating across the spectrum.
APP / 05
Counter-Drone Operations
Bands 5–20 cover every commercial and military drone frequency from 1.2 GHz to 6 GHz — including sub-GHz LoRa C2 (B3–B4), GNSS L1/L2 (B5–B6), 2.4 GHz ISM (B9), 5.2 GHz UNII (B17–B18) and 5.8 GHz ISM (B19–B20).
APP / 06
Tactical Communications Denial
Simultaneously disrupts walkie-talkie bands (VHF/UHF, B1–B4), cellular communications (4G/5G, B7–B9), telemetry and data links across the full spectrum. Configurable per-band activation allows targeted denial without affecting all frequencies.
07 / Operational Advantages

Why Operators Choose the KJ6000C.

Twenty bands. AWJ technology. Modular serviceability. Full-spectrum coverage in a vehicle-deployable ruggedised case.

ADV / 01
Zero Frequency Gaps
Contiguous 300 MHz band steps from 20 MHz to 6 GHz leave no spectral windows for adversaries to exploit. A threat operating on any frequency within range is denied — without prior knowledge of the specific frequency being used.
ADV / 02
AWJ Adaptive Waveforms
Proprietary AWJ algorithms adapt the jamming signal characteristics to the target — more effective than generic noise jamming across every band. Particularly effective against frequency-hopping and spread-spectrum systems that defeat conventional swept jammers.
ADV / 03
Selective Band Control
Independent switching on every band allows operators to protect friendly communication channels by deactivating specific bands while maintaining jamming on all others. Precision spectrum management in dynamic operational environments.
ADV / 04
Field-Serviceable in Minutes
Module failures are flagged instantly on the front panel. Any of the 20 modules can be removed and replaced without tools in under two minutes. System returns to near-full power immediately — no return to base, no downtime for the mission.
ADV / 05
Future-Proof Modularity
As new threat frequencies emerge, individual modules can be replaced with alternative 300 MHz band configurations. Upgrade to 50W modules as mission requirements demand greater range. The chassis and control system remain constant — only the modules evolve.
ADV / 06
Rapid Vehicle Integration
No permanent vehicle modification. Place in any pickup truck cargo area, connect one DC power cable — operational in under five minutes. Redeployable between vehicles as the mission demands without any tools or re-installation procedure.
08 / Request a Quote

Configure Your KJ6000C.

The KJ6000C is available in standard 30W configuration and with 50W module upgrades for extended range. Custom frequency band profiles are available — our engineering team can configure specific 300 MHz band allocations to match your operational threat profile.

Available to authorised military, law enforcement and government customers. Technical demonstrations and NDA-protected briefings available on request. Optional accessories include AC-DC converter and portable battery packs for off-vehicle operation.

Platform Summary
ModelK9-KJ6000C
TechnologyAWJ Adaptive
Bands20 Independent
Total Power600W (30W ×20)
Upgrade50W modules
Coverage20 MHz – 6 GHz
Band BW300 MHz each
IP RatingIP65
Power In15–30V DC
OriginReino Unido